Sika Sikatack MACH-30 XV

Sika Sikatack MACH-30 XV Datasheet
  • Description for Sika Sikatack MACH-30 XV

    A 1-component, an all-in-one modulus, cold-applied, fast curing, high-viscosity polyurethane adhesive designed for use in replacing direct glazed automotive glass parts.

    *See Terms of Use Below

    Brand Sikatack
    Application Type Bond
    1 Part or 2 Part 1 Part
    Industry Direct Glazing, Automotive Glass replacement, Mobile
    Manufacturer Sika
    Chemistry Polyurethane
    Cure Method Moisture-curing
    Cure Time (min) Fast
    Viscosity (cPs) High, Very good non-sag properties
    Color Black
    Chemical Resistance Resistant to fresh water, Resistant to seawater, Resistant to diluted acids, Resistant to diluted caustic solutions, Temporarily resistant to fuels, Temporarily resistant to mineral oils, Temporarily resistant to vegetable, Temporarily resistant to animal fats, Temporarily resistant to oils, Not resistant to organic acids, Not resistant to glycolic alcohol, Not resistant to concentrated mineral acids, Not resistant to caustic solutions
    Relative Solvent Resistance Chemical Resistance: Not resistant to solvents
    High Temperature Resistance (°C) 93
    Low Temperature Resistance (°C) -40
    Density (g/cm³) 1.23 (kg/l)
  • Technical Data for Sika Sikatack MACH-30 XV

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Industry
      • Automotive - Automotive Glass replacement
      • Smartphone and Tablet - Mobile
      • Direct Glazing
      • Other - In-shop installations
    • Chemistry
    • Cure Method
      • Moisture - Moisture-curing
    • Color
      • Black
    • Brand
      • Sikatack
    Specifications
    Cure Specs
    Application Temperature (°F) 50 to 120, 0 to 120, 0 to 171
    Cure Time (min) Fast
    Open Time Temperature (°C) 23
    Viscosity (cPs) High, Very good non-sag properties
    Tack Free Time (min) 10 Test Method
    Open Time (min) 8
    Thixotropic Enhanced thixotropic properties
    Bond Strength
    Shear Strength (psi) 725 Test Method
    Tensile Strength (psi) 1,150 Test Method
    Material Resistance
    Chemical Resistance Resistant to fresh water, Resistant to seawater, Resistant to diluted acids, Resistant to diluted caustic solutions, Temporarily resistant to fuels, Temporarily resistant to mineral oils, Temporarily resistant to vegetable, Temporarily resistant to animal fats, Temporarily resistant to oils, Not resistant to organic acids, Not resistant to glycolic alcohol, Not resistant to concentrated mineral acids, Not resistant to caustic solutions
    Relative Solvent Resistance Chemical Resistance: Not resistant to solvents
    High Temperature Resistance (°C) 93 Test Method
    Low Temperature Resistance (°C) -40 Test Method
    Hardness
    Shore A Hardness 68 Test Method
    Elongation (%) 230 Test Method
    Modulus (psi) All-in-one modulus
    Other Properties
    Density (g/cm³) 1.23 (kg/l) Test Method
    Business Information
    Shelf Life Temperature (°F) <77
    Shelf Life (mon) 9
  • Best Practices for Sika Sikatack MACH-30 XV

    *See Terms of Use Below

    1. Surface Preparation

      Surfaces must be clean, sound, dry, and free from all traces of traditional and non-traditional contamination. All corrosion must be removed and all bare metal scrapes and scratches must be prepared in accordance with Sika's Corrosion Treatment recommendations.For preparation of all bonding surfaces, it is required to read and understand the instructions given in the Sika AGR Technician Training Manual. Windshields without ceramic coating need proper UV protection.

    2. Application

      Cut off the tip of the nozzle in accordance with the vehicle manufacturer's recommendations and screw onto the cartridge or the unipack adapter.

      It is recommended to apply the adhesive with a piston-type application gun. To ensure a uniform thickness of adhesive bead, we recommend that the adhesive be applied in the form of a triangular bead

    3. Removal

      Uncured SikaTack® MACH-30 XV may be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically.

      Hands and exposed skin have to be washed immediately using a suitable industrial hand cleaner and water. Strictly follow solvent manufacturer's instructions for use and warnings.

  • Comparable Materials for Sika Sikatack MACH-30 XV

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Sika - Sikatack MACH-30 XV

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

Characteristics of MMAs

Read Article

Testing the effectiveness of surface treatments

Read Article

An Overview of Fluid Dispensing Systems & How They’re Used

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Tack Free Time Test Methods
Tack Free Time Tack Free Temperature Test Method
10 min 23°C Skin time (CQP019-1), 50 % r.h.
Tensile Strength Test Methods
Tensile Strength Test Method
1,150 psi ASTM D412
Shear Strength Test Methods
Shear Strength Type Test Method
725 psi Tensile lap-shear strength CQP046-1 / ISO 4587
Low Temperature Resistance Test Methods
Low Temperature Resistance Test Method
-40°C Service temperature (CQP509-1 / CQP513-1)
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
93°C Service temperature (CQP509-1 / CQP513-1)
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method
68 CQP023-1 / ISO 7619-1
Elongation Test Methods
Elongation Test Method
230 % At break (ASTM D412)
Density Test Methods
Density Test Method
1.23 (kg/l) Uncured
;