Panacol Structalit 5511

Panacol Structalit 5511 Datasheet
  • Description for Panacol Structalit 5511

    Panacol Structalit 5511 is a 1 Part Heat-curing <br/> Modified epoxy Liquid used to Pot and Encapsulate Temperature sensitive<br/>substrates, High performance<br/>plastics and LCP

    *See Terms of Use Below

    Brand Structalit
    Application Type Potting, Sealing
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Substrate High performance plastics, PBT
    Industry Electronic grade standard, Wire protection
    Manufacturer Panacol
    Chemistry Modified epoxy, Solvent-free, Non-conductive, High purity, Free of heavy metals, Free of PFOS, Free of Phthalates
    Cure Method Heat-curing
    Cure Temperature (°C) 60, 80, 120
    Cure Time (min) 40, 25, 10
    Viscosity (cPs) 800 to 1,200
    Color Transparent
    High Temperature Resistance (°C) 150
    Low Temperature Resistance (°C) -40
    Key Specifications Conform to the current EU-Directive RoHS
  • Technical Data for Panacol Structalit 5511

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Liquid
    • Substrate
      • Plastic - High performance plastics
      • Polybutylene Terephthalate (PBT) - PBT
      • Other - Temperature sensitive substrates, LCP
    • Industry
      • Electronics - Electronic grade standard, Wire protection
    • Chemistry
      • Non-conductive
      • Solvent-Free
      • Epoxy - Modified epoxy
      • Metal-Free - Free of heavy metals
      • Other - High purity, Free of PFOS, Free of Phthalates
    • Cure Method
      • Heat - Heat-curing
    • Color
      • Clear / Transparent - Transparent
    • Key Specifications
      • RoHS (Restriction of Hazardous Substances) - Conform to the current EU-Directive RoHS
    • Brand
      • Structalit
    Specifications
    Cure Specs
    Cure Temperature (°C) 60, 80, 120
    Cure Time (min) 40, 25, 10
    Viscosity (cPs) 800 to 1,200 Test Method
    Linear Shrinkage (%) <1.00 Test Method
    Work / Pot Time (min) 1,440 Test Method
    Bond Strength
    General Bond Strength (psi) Outstanding
    Shear Strength (psi) 8–10 (MPa) Test Method
    Material Resistance
    High Temperature Resistance (°C) 150 Test Method
    Low Temperature Resistance (°C) -40 Test Method
    Hardness
    Shore D Hardness 50 to 65 Test Method
    Elongation (%) 8 to 15 Test Method
    Modulus (psi) 800 to 1,000 Test Method
    Other Properties
    Glass Transition Temp (Tg) (°C) 30 to 45 Test Method
    Coefficient of Thermal Expansion (CTE) 30 - 45 (ppm/K), 150 - 280 (ppm/K) Test Method
    Flash Point (°F) >212.0 Test Method
    Business Information
    Shelf Life Details Store in original, unopened containers; Store uncured product in its original, closed container in a dry location. Any material removed from the original container must not be returned to the container as it could be contaminated. Panacol cannot assume responsibility for products that were improperly stored, contaminated, or repackaged into other containers.
    Shelf Life Temperature (°F) -4
    Shelf Life (mon) 3 to 6
  • Best Practices

    Best Practices information currently not available.
  • Comparable Materials for Panacol Structalit 5511

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Panacol - Structalit 5511

Get personal assistance with your specific application needs.

Your Profile Edit

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Staking materials and properties

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Epoxies for flip chips

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Viscosity Test Methods
Viscosity Test Method Temperature
800 to 1,200 cPs PE-Norm 064, Uncured, Kinexus Rheometer, 10s-1 25°C
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
1,440 min Working time, Uncured 20 to 25°C Room temperature
Linear Shrinkage Test Methods
Linear Shrinkage Test Method
<1.00 % PE-Norm 031, Cured
Shear Strength Test Methods
Shear Strength Type Test Method
8–10 (MPa) Lap shear strength PE-Norm 013, Cured
Low Temperature Resistance Test Methods
Low Temperature Resistance Test Method
-40°C Temperature resistance, PE-Norm 059, Cured
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
150°C Temperature resistance, PE-Norm 059, Cured
Shore D Hardness Test Methods
Shore D Hardness Shore Hardness Test Method
50 to 65 PE-Norm 006, Cured
Modulus Test Methods
Modulus Test Method
800 to 1,000 psi Young´s modulus, Tensile test, PE-Norm 056
Elongation Test Methods
Elongation Test Method
8 to 15 % At break, PE-Norm 014
Flash Point Test Methods
Flash Point Test Method
>100.0°C PE-Norm 050, Uncured
Glass Transition Temp (Tg) Test Methods
Glass Transition Temp (Tg) Glass Transition Temperature (Tg) Test Method
30 to 45°C PE-Norm 009, Cured, DSC
Coefficient of Thermal Expansion (CTE) Test Methods
Coefficient of Thermal Expansion (CTE) CTE Test Method
30 - 45 (ppm/K) PE-Norm 017, Below Tg
150 - 280 (ppm/K) PE-Norm 017, Above Tg
;