- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
M1305
Bond; 2-Part; Liquid; Acrylic; Resin/Activator;
• Structural Acrylic Adhesive • Fast, room temperature cure • Excellent adhesion to plastics and metals • Good toughness and durability • High peel and good impact strength • Environmentally friendly – 100% solids • VOC compliance • Excellent gap-filling capability •
;
M1315
Bond; 2-Part; Liquid; Acrylic; Resin/Activator;
• Structural Acrylic Adhesive • Room temperature cure • Moderate cure rate • Excellent adhesion to plastics and metals • Good toughness and durability • Environmentally friendly – 100% solids • VOC compliance • Excellent gap-filling capability • High peel and good impact strength •
;
LL497
Bond; 1-Part; Liquid; Acrylic; Ultraviolet light;
• Glass bonding adhesive • On-demand cure capability;
Loctite E-04
Bond; 2-Part; Liquid; Epoxy; Part A/Part B;
A two-part, toughened epoxy adhesive that cures at room temperature. Resistant to a wide range of chemical and environmental conditions. Has excellent impact resistance and outstanding electrical insulation properties.;
Manufacturer:
Henkel
Brand:
Bondmaster; Loctite
Chemical Resistance:
0.0001 N NaOH; 0.1 N HCL; 20% H3PO4; Acetone; Antifreeze; Freon; Gasoline; Heptane; MEK; Salt Spray; Toluene; Transmission Fluid; Water
E01
Bond; 2-Part; Liquid; Epoxy; Part A/Part B;
A two-part, epoxy adhesive that is easy to use and apply. It comes to a full cure at room temperature, is non-flammable, has low shrinkage and adheres to a wide variety of substrates. Has a soft paste consistency for precise application to parts.;
Bondmaster 4L75
Bond; 1-Part; Liquid; Urethane Acrylate; Ultraviolet light;
An ultraviolet light cure adhesive. This adhesive will bond most plastics commonly used in the medical device industry, such as polycarbonate, PVC, polysulfone, SAN, ABS, SBR, polystyrene and acrylics.;
Product E-310
Bond; 1-Part; Paste; Epoxy; Heat;
A single-component epoxy designed for structural bonding of metal, glass and plastic. The single component epoxy cures at elevated temperatures. Excellent vibration and impact resistance. High viscosity at curing temperature.
;
Manufacturer:
Henkel
Brand:
Bondmaster; Loctite
Chemical Resistance:
Alcohols; Aqueous; Halogenated solvents; Hydrocarbons; Salt spray; Water
E18
Bond; 2-Part; Liquid; Epoxy; Part A/Part B;
• Fast setting • Environmentally Friendly – 100% Solids • Full Cure at Room Temperature • Low Shrinkage • Adhesion to a Wide Variety of Substrates • Nonflammable •
;
Lite-Lok 492
Coat; 1-Part; Liquid; Urethane Acrylate; UV;
• UV Light Curable Coating • Fast cure under UV light • Hard, tack - free surface • 100 % solids, no solvents or by-products • Good humidity resistance • Good light stability and weathering resistance • Good abrasion resistance •
;
531
Bond; 2-Part; Liquid; Acrylic; Room Temperature Cure;
• Structural Acrylic Adhesive • Magnet Bonding Structural • Metal & Glass Bonding • Rapid Room Temperature Cure • Fixtures Parts in 15 to 30 Seconds • 50% Strength Obtained in 15 Minutes • Environmentally Friendly – 100% Solids • Nonflammable • No Mix Application • Excellent Adhesion to Ferrite Magnet and Metal Surfaces
;
Manufacturer:
Henkel
Brand:
Bondmaster
Chemical Resistance:
Salt Spray
M1305
Bond; 2-Part; Liquid; Acrylic; Resin/Activator
• Structural Acrylic Adhesive • Fast, room temperature cure • Excellent adhesion to plastics and metals • Good toughness and durability • High peel and good impact strength • Environmentally friendly – 100% solids • VOC compliance • Excellent gap-filling capability •
M1315
Bond; 2-Part; Liquid; Acrylic; Resin/Activator
• Structural Acrylic Adhesive • Room temperature cure • Moderate cure rate • Excellent adhesion to plastics and metals • Good toughness and durability • Environmentally friendly – 100% solids • VOC compliance • Excellent gap-filling capability • High peel and good impact strength •
LL497
Bond; 1-Part; Liquid; Acrylic; Ultraviolet light
• Glass bonding adhesive • On-demand cure capability
Loctite E-04
Bond; 2-Part; Liquid; Epoxy; Part A/Part B
A two-part, toughened epoxy adhesive that cures at room temperature. Resistant to a wide range of chemical and environmental conditions. Has excellent impact resistance and outstanding electrical insulation properties.
Manufacturer: Henkel
Brand: Bondmaster; Loctite
Chemical Resistance: 0.0001 N NaOH; 0.1 N HCL; 20% H3PO4; Acetone; Antifreeze; Freon; Gasoline; Heptane; MEK; Salt Spray; Toluene; Transmission Fluid; Water
Package Sizes
200 ml Dual Cartridge
E01
Bond; 2-Part; Liquid; Epoxy; Part A/Part B
A two-part, epoxy adhesive that is easy to use and apply. It comes to a full cure at room temperature, is non-flammable, has low shrinkage and adheres to a wide variety of substrates. Has a soft paste consistency for precise application to parts.
Bondmaster 4L75
Bond; 1-Part; Liquid; Urethane Acrylate; Ultraviolet light
An ultraviolet light cure adhesive. This adhesive will bond most plastics commonly used in the medical device industry, such as polycarbonate, PVC, polysulfone, SAN, ABS, SBR, polystyrene and acrylics.
Product E-310
Bond; 1-Part; Paste; Epoxy; Heat
A single-component epoxy designed for structural bonding of metal, glass and plastic. The single component epoxy cures at elevated temperatures. Excellent vibration and impact resistance. High viscosity at curing temperature.
Manufacturer: Henkel
Brand: Bondmaster; Loctite
Chemical Resistance: Alcohols; Aqueous; Halogenated solvents; Hydrocarbons; Salt spray; Water
E18
Bond; 2-Part; Liquid; Epoxy; Part A/Part B
• Fast setting • Environmentally Friendly – 100% Solids • Full Cure at Room Temperature • Low Shrinkage • Adhesion to a Wide Variety of Substrates • Nonflammable •
Manufacturer: Henkel
Brand: Bondmaster
Lite-Lok 492
Coat; 1-Part; Liquid; Urethane Acrylate; UV
• UV Light Curable Coating • Fast cure under UV light • Hard, tack - free surface • 100 % solids, no solvents or by-products • Good humidity resistance • Good light stability and weathering resistance • Good abrasion resistance •
Manufacturer: Henkel
Brand: Bondmaster
531
Bond; 2-Part; Liquid; Acrylic; Room Temperature Cure
• Structural Acrylic Adhesive • Magnet Bonding Structural • Metal & Glass Bonding • Rapid Room Temperature Cure • Fixtures Parts in 15 to 30 Seconds • 50% Strength Obtained in 15 Minutes • Environmentally Friendly – 100% Solids • Nonflammable • No Mix Application • Excellent Adhesion to Ferrite Magnet and Metal Surfaces
Brand
Chemical Resistance
Application Type
1 Part or 2 Part
Description
Bondmaster
Bond
2-Part
• Structural Acrylic Adhesive • Fast, room temperature cure • Excellent adhesion to plastics and metals • Good toughness and durability • High peel and good impact strength • Environmentally friendly – 100% solids • VOC compliance • Excellent gap-filling capability •
Bondmaster
Bond
2-Part
• Structural Acrylic Adhesive • Room temperature cure • Moderate cure rate • Excellent adhesion to plastics and metals • Good toughness and durability • Environmentally friendly – 100% solids • VOC compliance • Excellent gap-filling capability • High peel and good impact strength •
Bondmaster
Bond; Instant Adhesives
1-Part
• Glass bonding adhesive • On-demand cure capability
Bondmaster; Loctite
0.0001 N NaOH; 0.1 N HCL; 20% H3PO4; Acetone; Antifreeze; Freon; Gasoline; Heptane; MEK; Salt Spray; Toluene; Transmission Fluid; Water
Bond
2-Part
A two-part, toughened epoxy adhesive that cures at room temperature. Resistant to a wide range of chemical and environmental conditions. Has excellent impact resistance and outstanding electrical insulation properties.
Bondmaster
Bond; Repair
2-Part
A two-part, epoxy adhesive that is easy to use and apply. It comes to a full cure at room temperature, is non-flammable, has low shrinkage and adheres to a wide variety of substrates. Has a soft paste consistency for precise application to parts.
Bondmaster
Bond; Instant Adhesives
1-Part
An ultraviolet light cure adhesive. This adhesive will bond most plastics commonly used in the medical device industry, such as polycarbonate, PVC, polysulfone, SAN, ABS, SBR, polystyrene and acrylics.
Bondmaster; Loctite
Alcohols; Aqueous; Halogenated solvents; Hydrocarbons; Salt spray; Water
Bond
1-Part
A single-component epoxy designed for structural bonding of metal, glass and plastic. The single component epoxy cures at elevated temperatures. Excellent vibration and impact resistance. High viscosity at curing temperature.
Bondmaster
Bond
2-Part
• Fast setting • Environmentally Friendly – 100% Solids • Full Cure at Room Temperature • Low Shrinkage • Adhesion to a Wide Variety of Substrates • Nonflammable •
Bondmaster
Bond; Coat; Instant Adhesives
1-Part
• UV Light Curable Coating • Fast cure under UV light • Hard, tack - free surface • 100 % solids, no solvents or by-products • Good humidity resistance • Good light stability and weathering resistance • Good abrasion resistance •
Bondmaster
Salt Spray
Bond
2-Part
• Structural Acrylic Adhesive • Magnet Bonding Structural • Metal & Glass Bonding • Rapid Room Temperature Cure • Fixtures Parts in 15 to 30 Seconds • 50% Strength Obtained in 15 Minutes • Environmentally Friendly – 100% Solids • Nonflammable • No Mix Application • Excellent Adhesion to Ferrite Magnet and Metal Surfaces
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
