- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
2764 results
Reset
HP 250
Bond; 2-Part; Liquid; Epoxy; Resin/Hardener;
High performance epoxy with high shear strength, impact toughness for structural assembly applications.;
Manufacturer:
Devcon (ITW)
Chemical Resistance:
Acetic (Dilute) 10%; Ammonia; Ethanol; Excellent salt spray; Gasoline; Hydrochloric 10%; Isopropanol; Mineral Spirits; Outstanding; Sodium Hydroxide 10%; Sodium Hypochlorite; Sulfuric 10%
2 Ton Epoxy
Bond; 2-Part; Liquid; Epoxy; 2-Part Cure;
Extremely strong, water-resistant epoxy adhesive that forms a powerful bond with ferrous and non-ferrous metals, ceramics wood, concrete, or glass in any combination. Self-levels after application.;
Manufacturer:
Devcon (ITW)
Chemical Resistance:
Acetone; Ammonia; Antifreeze; Gasoline (Unleaded); Glycols; Kerosene; Mineral Spirits; Sodium Hydroxide 10%; Water resistant
DP460
Bond; 2-Part; Liquid; Epoxy; Base/Accelerator;
Long worklife toughened epoxy • 2-4 hrs. handling strength;
Manufacturer:
3M
EP11HT
Bond; 2-Part; Thixotropic paste; Epoxy; Part A/Part B;
A two part filled epoxy adhesive, room temperature to a tough, semi-rigid material, good wetting to most surfaces and is very thixotropic to resist running and sagging, very good vibration and impact resistance.;
Manufacturer:
Resinlab
Chemical Resistance:
Good resistance to water; Inorganic acids; Inorganic bases; Organic solvents; Salt spray
DP100FR
Bond; 2-Part; Liquid; Epoxy; Base/Accelerator;
25-30 min. handling strength • Meets UL94V-0 rating • Self-extinguishing version of DP100;
Manufacturer:
3M
Chemical Resistance:
JP-4 Fuel; Salt Spray; Tap Water; Water Vapor
Wet-Surface-Patching Purple Package #04003
Sealant; 2-Part; Liquid; Epoxy; Part A/Part B;
A two–component, room temperature cure epoxy system designed as a wet surface patching or gap filling adhesive. It can be used with fiberglass tape as a bonding impregnant and has good resistance to exterior exposure.;
Manufacturer:
Hardman
Chemical Resistance:
1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; VM+P Naphtha
EP1200 Black
Casting Resin; 2-Part; Liquid; Epoxy; Part A/Part B;
A highly filled, medium viscosity, casting resin, high thermal conductivity, high flexibility and low CTE.;
Manufacturer:
Resinlab
Chemical Resistance:
Inorganic acids; Inorganic bases; Organic solvents; Salt spray; Water
Loctite 3609
Bond; 1-Part; Gel; Epoxy; Heat;
It is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. Particularly suited for applications where medium to high dispense speeds, high dot profile, high wet strength and good electrical characteristics are required.;
Manufacturer:
Henkel
Chemical Resistance:
Air; Solvent resistance
Water-Clear Green Package #04004
Bond; 2-Part; Liquid; Epoxy; Room temperature cure;
Use as an adhesive or coating. Bonds to metal, ceramics, glass, porcelain and wood. Covers and fills scratches. Impact resistant.;
Manufacturer:
Hardman
Chemical Resistance:
1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; Vm and P Naphtha
Scotch-Weld Epoxy Adhesive DP420 Black
Bond; 2-Part; Liquid; Epoxy; 2-Part cure;
• High shear strength • High peel strength • Easy mixing • 20 minute worklife • Two-part • Very high levels of durability.;
Manufacturer:
3M
HP 250
Bond; 2-Part; Liquid; Epoxy; Resin/Hardener
High performance epoxy with high shear strength, impact toughness for structural assembly applications.
Manufacturer: Devcon (ITW)
Chemical Resistance: Acetic (Dilute) 10%; Ammonia; Ethanol; Excellent salt spray; Gasoline; Hydrochloric 10%; Isopropanol; Mineral Spirits; Outstanding; Sodium Hydroxide 10%; Sodium Hypochlorite; Sulfuric 10%
2 Ton Epoxy
Bond; 2-Part; Liquid; Epoxy; 2-Part Cure
Extremely strong, water-resistant epoxy adhesive that forms a powerful bond with ferrous and non-ferrous metals, ceramics wood, concrete, or glass in any combination. Self-levels after application.
Manufacturer: Devcon (ITW)
Chemical Resistance: Acetone; Ammonia; Antifreeze; Gasoline (Unleaded); Glycols; Kerosene; Mineral Spirits; Sodium Hydroxide 10%; Water resistant
DP460
Bond; 2-Part; Liquid; Epoxy; Base/Accelerator
Long worklife toughened epoxy • 2-4 hrs. handling strength
Manufacturer: 3M
EP11HT
Bond; 2-Part; Thixotropic paste; Epoxy; Part A/Part B
A two part filled epoxy adhesive, room temperature to a tough, semi-rigid material, good wetting to most surfaces and is very thixotropic to resist running and sagging, very good vibration and impact resistance.
Manufacturer: Resinlab
Chemical Resistance: Good resistance to water; Inorganic acids; Inorganic bases; Organic solvents; Salt spray
Package Sizes
Part A Gray Quart Part A Gray Gal Part A Gray 5 Gal Pail Part B Gray Quart Part B Gray Gal Part B Gray 5 Gal Pail Gray 6 oz Barrier Techkit Red 10 ml Dual Syringe Red 50 ml Cartridge White 50 ml Cartridge Gray 50 ml Cartridge Gray 150 x 150 ml Ratio Pak Cartridge Gray 200 ml Cartridge Gray 300 x 300 ml Ratio Pak Cartridge Gray 400 ml Cartridge Gray 600 ml Cartridge Gray 1/2 Pint Kit
DP100FR
Bond; 2-Part; Liquid; Epoxy; Base/Accelerator
25-30 min. handling strength • Meets UL94V-0 rating • Self-extinguishing version of DP100
Manufacturer: 3M
Chemical Resistance: JP-4 Fuel; Salt Spray; Tap Water; Water Vapor
Wet-Surface-Patching Purple Package #04003
Sealant; 2-Part; Liquid; Epoxy; Part A/Part B
A two–component, room temperature cure epoxy system designed as a wet surface patching or gap filling adhesive. It can be used with fiberglass tape as a bonding impregnant and has good resistance to exterior exposure.
Manufacturer: Hardman
Chemical Resistance: 1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; VM+P Naphtha
Package Sizes
Box of 100
EP1200 Black
Casting Resin; 2-Part; Liquid; Epoxy; Part A/Part B
A highly filled, medium viscosity, casting resin, high thermal conductivity, high flexibility and low CTE.
Manufacturer: Resinlab
Chemical Resistance: Inorganic acids; Inorganic bases; Organic solvents; Salt spray; Water
Package Sizes
Part A Black Quart Part A Black Gal Part A Black 3.6 Gal Pail Part B Black Quart Part B Black Gal Part B Black 3.6 Gal Pail Black 3 cc Pre-Mixed & Frozen Syringe Black 5 cc Manual Syringe Black 10 cc Manual Pre-Mixed & Frozen Syringe Black 15 g Twinpak Black 20 ml Dual Syringe Black 30 ml Cartridge Black 50 ml Cartridge Black 50 ml Cartridge w/ Cert Black 50 ml Tah Cartridge Black 150 x 150 ml Ratio Park Cartridge Black 200 ml Cartridge Black 300 x 300 ml Ratio Pak Cartridge Black 400 ml Cartridge Blue 400 ml Cartridge White 400 ml Cartridge Black 600 ml Cartridge Black 750 x 750 ml Cartridge Black 750 x 750 ml Ratio Pak Cartridge
Loctite 3609
Bond; 1-Part; Gel; Epoxy; Heat
It is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. Particularly suited for applications where medium to high dispense speeds, high dot profile, high wet strength and good electrical characteristics are required.
Manufacturer: Henkel
Chemical Resistance: Air; Solvent resistance
Water-Clear Green Package #04004
Bond; 2-Part; Liquid; Epoxy; Room temperature cure
Use as an adhesive or coating. Bonds to metal, ceramics, glass, porcelain and wood. Covers and fills scratches. Impact resistant.
Manufacturer: Hardman
Chemical Resistance: 1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; Vm and P Naphtha
Package Sizes
Box of 100
Scotch-Weld Epoxy Adhesive DP420 Black
Bond; 2-Part; Liquid; Epoxy; 2-Part cure
• High shear strength • High peel strength • Easy mixing • 20 minute worklife • Two-part • Very high levels of durability.
Manufacturer: 3M
Chemistry
Chemical Resistance
Application Type
1 Part or 2 Part
Description
Epoxy
Acetic (Dilute) 10%; Ammonia; Ethanol; Excellent salt spray; Gasoline; Hydrochloric 10%; Isopropanol; Mineral Spirits; Outstanding; Sodium Hydroxide 10%; Sodium Hypochlorite; Sulfuric 10%
Bond
2-Part
High performance epoxy with high shear strength, impact toughness for structural assembly applications.
Epoxy
Acetone; Ammonia; Antifreeze; Gasoline (Unleaded); Glycols; Kerosene; Mineral Spirits; Sodium Hydroxide 10%; Water resistant
Bond; Pot
2-Part
Extremely strong, water-resistant epoxy adhesive that forms a powerful bond with ferrous and non-ferrous metals, ceramics wood, concrete, or glass in any combination. Self-levels after application.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Clear 25 ml Tube Clear 50 ml Clear 400 ml Clear 9 lb Kit Clear 10 Gal White 10 Gal White 50 Gal White 100 Gal Black 100 Gal
Epoxy; Amine
Bond
2-Part
Long worklife toughened epoxy • 2-4 hrs. handling strength
Epoxy
Good resistance to water; Inorganic acids; Inorganic bases; Organic solvents; Salt spray
Bond
2-Part
A two part filled epoxy adhesive, room temperature to a tough, semi-rigid material, good wetting to most surfaces and is very thixotropic to resist running and sagging, very good vibration and impact resistance.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Part A Gray Quart Part A Gray Gal Part A Gray 5 Gal Pail Part B Gray Quart Part B Gray Gal Part B Gray 5 Gal Pail Gray 6 oz Barrier Techkit Red 10 ml Dual Syringe Red 50 ml Cartridge White 50 ml Cartridge Gray 50 ml Cartridge Gray 150 x 150 ml Ratio Pak Cartridge Gray 200 ml Cartridge Gray 300 x 300 ml Ratio Pak Cartridge Gray 400 ml Cartridge Gray 600 ml Cartridge Gray 1/2 Pint Kit
Epoxy
JP-4 Fuel; Salt Spray; Tap Water; Water Vapor
Bond
2-Part
25-30 min. handling strength • Meets UL94V-0 rating • Self-extinguishing version of DP100
Epoxy; Solvent-Free
1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; VM+P Naphtha
Adhesive; Repair; Sealant
2-Part
A two–component, room temperature cure epoxy system designed as a wet surface patching or gap filling adhesive. It can be used with fiberglass tape as a bonding impregnant and has good resistance to exterior exposure.
Epoxy
Inorganic acids; Inorganic bases; Organic solvents; Salt spray; Water
Bond; Casting Resin; Potting
2-Part
A highly filled, medium viscosity, casting resin, high thermal conductivity, high flexibility and low CTE.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Part A Black Quart Part A Black Gal Part A Black 3.6 Gal Pail Part B Black Quart Part B Black Gal Part B Black 3.6 Gal Pail Black 3 cc Pre-Mixed & Frozen Syringe Black 5 cc Manual Syringe Black 10 cc Manual Pre-Mixed & Frozen Syringe Black 15 g Twinpak Black 20 ml Dual Syringe Black 30 ml Cartridge Black 50 ml Cartridge Black 50 ml Cartridge w/ Cert Black 50 ml Tah Cartridge Black 150 x 150 ml Ratio Park Cartridge Black 200 ml Cartridge Black 300 x 300 ml Ratio Pak Cartridge Black 400 ml Cartridge Blue 400 ml Cartridge White 400 ml Cartridge Black 600 ml Cartridge Black 750 x 750 ml Cartridge Black 750 x 750 ml Ratio Pak Cartridge
Epoxy
Air; Solvent resistance
Bond; Mount
1-Part
It is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. Particularly suited for applications where medium to high dispense speeds, high dot profile, high wet strength and good electrical characteristics are required.
Epoxy
1,1,1 Trichloroethane; Ethyl Alcohol 50%; Excellent water resistance; Gasoline; Hydrochloric Acid (2N); Sulfuric Acid, 30%; Toluene; Vm and P Naphtha
Bond; Coat; Repair
2-Part
Use as an adhesive or coating. Bonds to metal, ceramics, glass, porcelain and wood. Covers and fills scratches. Impact resistant.
Epoxy; Amine
Bond
2-Part
• High shear strength • High peel strength • Easy mixing • 20 minute worklife • Two-part • Very high levels of durability.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
