- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
3723 results
Reset
3145 RTV Clear Adhesive/Sealant
Seal; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV;
Noncorrosive; high tensile strength, elongation, peel and lap shear values, contains UV indicator for automated inspection; non-flow.;
Manufacturer:
Dow
3145 RTV Grey Adhesive/Sealant
Bond; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV;
Noncorrosive; high tensile strength, elongation, peel and lap shear values, good for high temperature applications; non-flow.;
Manufacturer:
Dow
Dowsil 832 Multi-Surface Adhesive Sealant
Sealing; 1-Part; Paste; Silicone; Moisture;
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.;
Manufacturer:
Dow
Sylgard 184 Silicone Elastomer
Pot
; 2-Part; Liquid; Silicone; Base/Curing Agent;
Two part; 10:1 mix; minimal shrinkage; no exotherm during cure; no solvents or cure byproducts; deep section cure; repairable; good dielectric properties; flexible elastomer.;
Manufacturer:
Dow
Chemical Resistance:
Good
Dowsil 3140 RTV Coating
Coating; 1-Part; Liquid; Silicone elastomer; RTV;
• A one part component • Room temperature cure • coating with good flowability • Polydimethylsiloxane adhesive • Pin sealing • self-leveling • solder joint coverage • good flame resistance ;
Manufacturer:
Dow
Chemical Resistance:
Good
Dowsil 1-2577 Conformal Coating
Conformal Coating; 1-Part; Liquid; Silicone resin; Room temperature cure;
One-part, translucent medium viscosity conformal coating with firm, abrasion resistant surface after cure. Solvent-borne resin coating. Room temperature cure.;
Manufacturer:
Dow
Chemical Resistance:
Good
ThermoSink 35-1
Potting; 2-Part; Liquid; Silicone; Room temperature;
A two-component, flowable, thermally conductive silicone elastomer, water resistant, room temperature cure.;
Manufacturer:
Resin Designs
Chemical Resistance:
Water Resistant
Dowsil 3-1953 Conformal Coating
Conformal coating; 1-Part; Liquid; Silicone elastomer; RTV;
It is a solventless, elastomeric coating suitable for lighting, industrial and automotive industries requiring various reliability standards as a coating for rigid and flexible circuit boards, sensitive components and fine pitched designs.;
Manufacturer:
Dow
Chemical Resistance:
Good
Dowsil 3-4207 Dielectric Tough Gel
Encapsulant; 2-Part; Gel (Post-cure); Silicone; Part A/Part B;
Firm or tough, thermal/mechanical shock and vibration damping, primerless chemical adhesion at room temperature (except 3-4237 Dielectric Firm Gel, which requires heat to develop chemical adhesion), excellent dielectric properties, flexible cure schedule, reversion resistant, thick section cure, compatible with automated dispensing equipment, and physical and electrical stability over a wide temperature range.;
Manufacturer:
Dow
Loctite Stycast 5954
Encapsulate; 2-Part; Liquid; Silicone; Part A/Part B;
● High thermal conductivity ● Reversion resistant ● Non-Corrosive ● High electrical insulation ● Easy mix ratio ● Heat Cure ● Encapsulant
;
Manufacturer:
Henkel
3145 RTV Clear Adhesive/Sealant
Seal; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV
Noncorrosive; high tensile strength, elongation, peel and lap shear values, contains UV indicator for automated inspection; non-flow.
Manufacturer: Dow
3145 RTV Grey Adhesive/Sealant
Bond; 1-Part; Pre-Cure: Paste; Silicone elastomer; RTV
Noncorrosive; high tensile strength, elongation, peel and lap shear values, good for high temperature applications; non-flow.
Manufacturer: Dow
Dowsil 832 Multi-Surface Adhesive Sealant
Sealing; 1-Part; Paste; Silicone; Moisture
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.
Manufacturer: Dow
Sylgard 184 Silicone Elastomer
Pot
; 2-Part; Liquid; Silicone; Base/Curing Agent
Two part; 10:1 mix; minimal shrinkage; no exotherm during cure; no solvents or cure byproducts; deep section cure; repairable; good dielectric properties; flexible elastomer.
Manufacturer: Dow
Chemical Resistance: Good
Dowsil 3140 RTV Coating
Coating; 1-Part; Liquid; Silicone elastomer; RTV
• A one part component • Room temperature cure • coating with good flowability • Polydimethylsiloxane adhesive • Pin sealing • self-leveling • solder joint coverage • good flame resistance
Manufacturer: Dow
Chemical Resistance: Good
Dowsil 1-2577 Conformal Coating
Conformal Coating; 1-Part; Liquid; Silicone resin; Room temperature cure
One-part, translucent medium viscosity conformal coating with firm, abrasion resistant surface after cure. Solvent-borne resin coating. Room temperature cure.
Manufacturer: Dow
Chemical Resistance: Good
ThermoSink 35-1
Potting; 2-Part; Liquid; Silicone; Room temperature
A two-component, flowable, thermally conductive silicone elastomer, water resistant, room temperature cure.
Dowsil 3-1953 Conformal Coating
Conformal coating; 1-Part; Liquid; Silicone elastomer; RTV
It is a solventless, elastomeric coating suitable for lighting, industrial and automotive industries requiring various reliability standards as a coating for rigid and flexible circuit boards, sensitive components and fine pitched designs.
Manufacturer: Dow
Chemical Resistance: Good
Dowsil 3-4207 Dielectric Tough Gel
Encapsulant; 2-Part; Gel (Post-cure); Silicone; Part A/Part B
Firm or tough, thermal/mechanical shock and vibration damping, primerless chemical adhesion at room temperature (except 3-4237 Dielectric Firm Gel, which requires heat to develop chemical adhesion), excellent dielectric properties, flexible cure schedule, reversion resistant, thick section cure, compatible with automated dispensing equipment, and physical and electrical stability over a wide temperature range.
Manufacturer: Dow
Loctite Stycast 5954
Encapsulate; 2-Part; Liquid; Silicone; Part A/Part B
● High thermal conductivity ● Reversion resistant ● Non-Corrosive ● High electrical insulation ● Easy mix ratio ● Heat Cure ● Encapsulant
Manufacturer: Henkel
Chemistry
Chemical Resistance
Application Type
1 Part or 2 Part
Description
Silicone elastomer
Bond; Gaskets; Seal
1-Part
Noncorrosive; high tensile strength, elongation, peel and lap shear values, contains UV indicator for automated inspection; non-flow.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Clear 90 ml Clear 90 ml to Spec Clear 305 ml Clear 305 ml to Spec Clear 19 kg
Silicone elastomer
Bond; Gaskets; Seal
1-Part
Noncorrosive; high tensile strength, elongation, peel and lap shear values, good for high temperature applications; non-flow.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Gray 90 ml Gray 90 ml to Spec Gray 305 ml Gray 305 ml to Spec Gray 19 kg
Silicone
Bonding; Repairing; Sealing
1-Part
One-part, RTV silicone sealant, low odor, neutral cure, will not corrode substrates, superior unprimed adhesion, cures to a tough rubbery solid.
Silicone; Silicone elastomer; Solvent-free
Good
Adhesive; Encapsulate
; Pot
2-Part
Two part; 10:1 mix; minimal shrinkage; no exotherm during cure; no solvents or cure byproducts; deep section cure; repairable; good dielectric properties; flexible elastomer.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
0.5 kg Kit .5 kg Kit to Spec 3.9 kg Kit 3.9 kg Kit to Spec 19.9 kg Kit Base 204.1 kg Curing Agent 20.4 kg Pail
Silicone elastomer; Polydimethylsiloxane; Solvent-free
Good
Adhesive; Coating; Encapsulant; Sealing
1-Part
• A one part component • Room temperature cure • coating with good flowability • Polydimethylsiloxane adhesive • Pin sealing • self-leveling • solder joint coverage • good flame resistance
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
493 Gram 493 g to Spec 90 ml Tube 90 ml to Spec 17.6 kg Gray 17.6 kg Pail 17.6 kg to Spec 204.1 kg Gray 201.4 kg Drum
Silicone resin; Solvent-borne
Good
Conformal Coating
1-Part
One-part, translucent medium viscosity conformal coating with firm, abrasion resistant surface after cure. Solvent-borne resin coating. Room temperature cure.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
453 g Cartridge 453 g to Spec 453 g Glass Bottle 3.6 kg Pail 3.6 kg to Spec 18.1 kg Pail 18.1 kg to Spec 199.5 kg Drum
Silicone
Water Resistant
Potting
2-Part
A two-component, flowable, thermally conductive silicone elastomer, water resistant, room temperature cure.
Silicone elastomer; Polydimethylsiloxane; Solventless
Good
Conformal coating
1-Part
It is a solventless, elastomeric coating suitable for lighting, industrial and automotive industries requiring various reliability standards as a coating for rigid and flexible circuit boards, sensitive components and fine pitched designs.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
175 ml 3.6 kg Pail 18.1 kg Bladder Pack 18.1 kg Bladder to Spec 18.1 kg Pail
Silicone; Solvent-free
Encapsulant; Pottant; Sealant
2-Part
Firm or tough, thermal/mechanical shock and vibration damping, primerless chemical adhesion at room temperature (except 3-4237 Dielectric Firm Gel, which requires heat to develop chemical adhesion), excellent dielectric properties, flexible cure schedule, reversion resistant, thick section cure, compatible with automated dispensing equipment, and physical and electrical stability over a wide temperature range.
Silicone
Encapsulate; Pot
2-Part
● High thermal conductivity ● Reversion resistant ● Non-Corrosive ● High electrical insulation ● Easy mix ratio ● Heat Cure ● Encapsulant
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
Part A Red 1 lb Part A Red 15 lb Part A Red 60 lb Part B White 1 lb Part B White 15 lb Part B White 60 lb
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
