- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
DP8005 Translucent
Bond; 2-Part; Liquid; Acrylic; Base/Accelerator;
Acrylic bonds low surface energy polyolefins without surface preparation • Excellent environmental resistance • 2-3 hour handling strength;
Manufacturer:
3M
Substrate:
Polypropylene; Acrylic (PMMA); Aluminum; Fiber Reinforced plastic; Glass; HDPE; Polycarbonate; PolyEthylene; ThermoPlastic Elastomers; Wood
Chemical Resistance:
Excellent water resistance; Salt Water; Very good
DP8010
Bond; 2-Part; Liquid; Acrylic; Base/Accelerator;
Acrylic bonds low surface energy polyolefins without surface preparation • Excellent environmental resistance • 1.5-2 hour handling strength • High shear and peel strength acrylic;
Manufacturer:
3M
Substrate:
Polypropylene; 304 Stainless Steel (1/32" thick)
; Acetal; Aluminum; Aluminum (1/16" thick)
; Cold-Rolled Steel (1/32" thick)
; Copper (1/16" thick)
; CRS (non-abraded CRS); Galvanealed Steel; Glass; Green FRP; HDG; Lexan; Many low surface energy plastics; Many low surface energy plastics; Metal; Oily HDG
; Plastic; Polyethylene; Polyolefins; Primed Aluminum; PTFE; Rubber; ThermoPlastic Polyolefin
Chemical Resistance:
Excellent water resistance; Salt Water; Very good
Hi-Strength 90 Spray Adhesive (Aerosol)
Bond; 1-Part; Aerosol; Hazardous Air Pollutants (HAPS) - 0.1 % by weight; Solvent;
An industrial grade spray adhesive that is typically used for bonding HPL to wood. Excellent adhesive for decorative laminates, particleboard, and many other materials, even polyethylene, polypropylene, and SBR rubber.;
Manufacturer:
3M
Substrate:
Polypropylene; Decorative Laminates; HPL to wood; HPL to wood; Many other materials; Metal; Particleboard; Plastic; Polyethylene; SBR rubber
3748
Bond; 1-Part; Sticks; Hot melt; Hot melt;
Good thermal shock resistance • Non-corrosive to copper for many electronic applications • Bonds polyolefins;
Manufacturer:
3M
Substrate:
Polypropylene; Polypropylene (High Density)
; ABS; Acrylic; Canvas; Carbon; Ceramic; Coated Cardboard; Coated Chipboard; Copper; Corrugated; Douglas Fir; Epoxy; Epoxy Glass FR-4; Fabric; Flexible foam; FRP; Glass; Laminate; Metal; Paper; Phenolic; Plastics; Polycarbonate; PolyEthylene; Polyethylene (High Density)
; Polyolefins; Polystyrene Foam; Polystyrene Foam; Uncoated Card Board; Uncoated Chipboard
4932
Bond; 1-Part; Tape; Acrylic; Pressure sensitive;
White, closed-cell acrylic foam carrier • Good adhesion to polypropylene and many powder paints• Apply as low as 50°F (10°C);
Manufacturer:
3M
Substrate:
Polypropylene; Galvanized Steel; Galvanized Steel; ABS; Aluminum; Ceramic; Enameled Steel; EVA; Glass; Polycarbonate; PolyEthylene; Rigid PVC; Silicone; Stainless steel
; Tedlar; Teflon
Chemical Resistance:
Excellent solvent resistance
4693
Bond; 1-Part; Liquid; Synthetic Elastomer; Solvent;
Long tack range • Water and heat resistant bond for many plastics, including polyethylene minutes and polypropylene;
Manufacturer:
3M
Substrate:
Polypropylene; ABS; Acrylic; Aluminum; Canvas; Glass filled polyester; Hi-impact styrene; Linear polyethylene; Many metals; Nylon; Phenolic Board; Phenolic Board; Plastic; PVC; Steel
Chemical Resistance:
Good water resistance
102
Bond; 1-Part; Liquid; Ethyl cyanoacrylate; Moisture;
A Single component, low viscosity general purpose cyanoacrylate adhesive, bonding product useful in applications or bonding closely fitting parts. It is fast setting and suitable for use on plastics, rubber and metals.;
Manufacturer:
PermaBond
Substrate:
Polypropylene; Aluminum; Bonding close-fitting components; Buna N Rubber; Epoxies; Grit blasted steel; Melamine; Metals; Most materials; Nylon; Phenolic; Plastics; Polyesters; Polyethylene; Polyurethane; PTFE; Rubber; Silicone; Steel; Urea formaldehyde
Chemical Resistance:
Air Reference; Dioctyl phthalate; Ethanol; Gasoline; Isopropanol; Solvent; Water resistance
Loctite SF 770
Bond; 1-Part; Liquid; Aliphatic amine; Humidity ;
A one part component is a primer used to make polyolefin and other low energy surfaces. It has very low viscosity, transparent to slightly hazy color and recommended for difficult to bond substrates which include
polyethylene, polypropylene, thermoplastic rubber materials.;
Manufacturer:
Henkel
Substrate:
Polypropylene; Acetal; HDPE; Mild steel (grit blasted); Other low energy surfaces; Polyethylene; Polyolefin; Polytetrafluoroethylene (PTFE); Thermoplastic rubber materials; Thermoplastic rubber materials
Chemical Resistance:
95% RH; Chemical resistance; Solvent resistance; Water
4952
Bond; 1-Part; Tape; Acrylic; Pressure sensitive;
White, closed-cell acrylic foam carrier • Good adhesion to polypropylene and many powder paints• Apply as low as 50°F (10°C);
Manufacturer:
3M
Substrate:
Polypropylene; Aluminum; EVA; PolyEthylene; Silicone; Stainless steel
; Tedlar; Teflon
Chemical Resistance:
Excellent solvent resistance
Dynasolve CU-5
Liquid cleaner; 1-Part; Liquid; Solvent-Based; Solvent;
Recommended for cleaning cured urethanes and crystallized isocyanates. can be used for extended periods, tolerate high resin loadings, and will reduce disposal costs. It is also recyclable via vacuum distillation. CU-6 is a non-gelling, higher flash point version of CU-5.;
Manufacturer:
EMD Group (Versum, Dynaloy)
Substrate:
Polypropylene; All metals; Butyl rubber; Epoxy; Halar; Kalrez; Melamine; Mild steel; Nylon 101; Polyethylene; Ryton; Silicone rubber; Teflon
DP8005 Translucent
Bond; 2-Part; Liquid; Acrylic; Base/Accelerator
Acrylic bonds low surface energy polyolefins without surface preparation • Excellent environmental resistance • 2-3 hour handling strength
Manufacturer: 3M
Substrate: Polypropylene; Acrylic (PMMA); Aluminum; Fiber Reinforced plastic; Glass; HDPE; Polycarbonate; PolyEthylene; ThermoPlastic Elastomers; Wood
Chemical Resistance: Excellent water resistance; Salt Water; Very good
DP8010
Bond; 2-Part; Liquid; Acrylic; Base/Accelerator
Acrylic bonds low surface energy polyolefins without surface preparation • Excellent environmental resistance • 1.5-2 hour handling strength • High shear and peel strength acrylic
Manufacturer: 3M
Substrate: Polypropylene; 304 Stainless Steel (1/32" thick)
; Acetal; Aluminum; Aluminum (1/16" thick)
; Cold-Rolled Steel (1/32" thick)
; Copper (1/16" thick)
; CRS (non-abraded CRS); Galvanealed Steel; Glass; Green FRP; HDG; Lexan; Many low surface energy plastics; Many low surface energy plastics; Metal; Oily HDG
; Plastic; Polyethylene; Polyolefins; Primed Aluminum; PTFE; Rubber; ThermoPlastic Polyolefin
Chemical Resistance: Excellent water resistance; Salt Water; Very good
Hi-Strength 90 Spray Adhesive (Aerosol)
Bond; 1-Part; Aerosol; Hazardous Air Pollutants (HAPS) - 0.1 % by weight; Solvent
An industrial grade spray adhesive that is typically used for bonding HPL to wood. Excellent adhesive for decorative laminates, particleboard, and many other materials, even polyethylene, polypropylene, and SBR rubber.
Manufacturer: 3M
Substrate: Polypropylene; Decorative Laminates; HPL to wood; HPL to wood; Many other materials; Metal; Particleboard; Plastic; Polyethylene; SBR rubber
3748
Bond; 1-Part; Sticks; Hot melt; Hot melt
Good thermal shock resistance • Non-corrosive to copper for many electronic applications • Bonds polyolefins
Manufacturer: 3M
Substrate: Polypropylene; Polypropylene (High Density)
; ABS; Acrylic; Canvas; Carbon; Ceramic; Coated Cardboard; Coated Chipboard; Copper; Corrugated; Douglas Fir; Epoxy; Epoxy Glass FR-4; Fabric; Flexible foam; FRP; Glass; Laminate; Metal; Paper; Phenolic; Plastics; Polycarbonate; PolyEthylene; Polyethylene (High Density)
; Polyolefins; Polystyrene Foam; Polystyrene Foam; Uncoated Card Board; Uncoated Chipboard
4932
Bond; 1-Part; Tape; Acrylic; Pressure sensitive
White, closed-cell acrylic foam carrier • Good adhesion to polypropylene and many powder paints• Apply as low as 50°F (10°C)
Manufacturer: 3M
Substrate: Polypropylene; Galvanized Steel; Galvanized Steel; ABS; Aluminum; Ceramic; Enameled Steel; EVA; Glass; Polycarbonate; PolyEthylene; Rigid PVC; Silicone; Stainless steel
; Tedlar; Teflon
Chemical Resistance: Excellent solvent resistance
4693
Bond; 1-Part; Liquid; Synthetic Elastomer; Solvent
Long tack range • Water and heat resistant bond for many plastics, including polyethylene minutes and polypropylene
Manufacturer: 3M
Substrate: Polypropylene; ABS; Acrylic; Aluminum; Canvas; Glass filled polyester; Hi-impact styrene; Linear polyethylene; Many metals; Nylon; Phenolic Board; Phenolic Board; Plastic; PVC; Steel
Chemical Resistance: Good water resistance
102
Bond; 1-Part; Liquid; Ethyl cyanoacrylate; Moisture
A Single component, low viscosity general purpose cyanoacrylate adhesive, bonding product useful in applications or bonding closely fitting parts. It is fast setting and suitable for use on plastics, rubber and metals.
Manufacturer: PermaBond
Substrate: Polypropylene; Aluminum; Bonding close-fitting components; Buna N Rubber; Epoxies; Grit blasted steel; Melamine; Metals; Most materials; Nylon; Phenolic; Plastics; Polyesters; Polyethylene; Polyurethane; PTFE; Rubber; Silicone; Steel; Urea formaldehyde
Chemical Resistance: Air Reference; Dioctyl phthalate; Ethanol; Gasoline; Isopropanol; Solvent; Water resistance
Loctite SF 770
Bond; 1-Part; Liquid; Aliphatic amine; Humidity
A one part component is a primer used to make polyolefin and other low energy surfaces. It has very low viscosity, transparent to slightly hazy color and recommended for difficult to bond substrates which include
polyethylene, polypropylene, thermoplastic rubber materials.
Manufacturer: Henkel
Substrate: Polypropylene; Acetal; HDPE; Mild steel (grit blasted); Other low energy surfaces; Polyethylene; Polyolefin; Polytetrafluoroethylene (PTFE); Thermoplastic rubber materials; Thermoplastic rubber materials
Chemical Resistance: 95% RH; Chemical resistance; Solvent resistance; Water
4952
Bond; 1-Part; Tape; Acrylic; Pressure sensitive
White, closed-cell acrylic foam carrier • Good adhesion to polypropylene and many powder paints• Apply as low as 50°F (10°C)
Manufacturer: 3M
Substrate: Polypropylene; Aluminum; EVA; PolyEthylene; Silicone; Stainless steel
; Tedlar; Teflon
Chemical Resistance: Excellent solvent resistance
Dynasolve CU-5
Liquid cleaner; 1-Part; Liquid; Solvent-Based; Solvent
Recommended for cleaning cured urethanes and crystallized isocyanates. can be used for extended periods, tolerate high resin loadings, and will reduce disposal costs. It is also recyclable via vacuum distillation. CU-6 is a non-gelling, higher flash point version of CU-5.
Manufacturer: EMD Group (Versum, Dynaloy)
Substrate: Polypropylene; All metals; Butyl rubber; Epoxy; Halar; Kalrez; Melamine; Mild steel; Nylon 101; Polyethylene; Ryton; Silicone rubber; Teflon
Substrate
Chemical Resistance
Application Type
1 Part or 2 Part
Description
Polypropylene; Acrylic (PMMA); Aluminum; Fiber Reinforced plastic; Glass; HDPE; Polycarbonate; PolyEthylene; ThermoPlastic Elastomers; Wood
Excellent water resistance; Salt Water; Very good
Bond
2-Part
Acrylic bonds low surface energy polyolefins without surface preparation • Excellent environmental resistance • 2-3 hour handling strength
Polypropylene; 304 Stainless Steel (1/32" thick)
; Acetal; Aluminum; Aluminum (1/16" thick)
; Cold-Rolled Steel (1/32" thick)
; Copper (1/16" thick)
; CRS (non-abraded CRS); Galvanealed Steel; Glass; Green FRP; HDG; Lexan; Many low surface energy plastics; Many low surface energy plastics; Metal; Oily HDG
; Plastic; Polyethylene; Polyolefins; Primed Aluminum; PTFE; Rubber; ThermoPlastic Polyolefin
Excellent water resistance; Salt Water; Very good
Bond
2-Part
Acrylic bonds low surface energy polyolefins without surface preparation • Excellent environmental resistance • 1.5-2 hour handling strength • High shear and peel strength acrylic
Polypropylene; Decorative Laminates; HPL to wood; HPL to wood; Many other materials; Metal; Particleboard; Plastic; Polyethylene; SBR rubber
Bond
1-Part
An industrial grade spray adhesive that is typically used for bonding HPL to wood. Excellent adhesive for decorative laminates, particleboard, and many other materials, even polyethylene, polypropylene, and SBR rubber.
View Datasheet
Contact Rep
Contact Rep
Interested in Package Size:
24 oz Aerosol 24 oz Inverted Spray Clear 5 Gal Pail 28.8 lb Cylinder Spray Clear 141.6 lb Cylinder Spray
Polypropylene; Polypropylene (High Density)
; ABS; Acrylic; Canvas; Carbon; Ceramic; Coated Cardboard; Coated Chipboard; Copper; Corrugated; Douglas Fir; Epoxy; Epoxy Glass FR-4; Fabric; Flexible foam; FRP; Glass; Laminate; Metal; Paper; Phenolic; Plastics; Polycarbonate; PolyEthylene; Polyethylene (High Density)
; Polyolefins; Polystyrene Foam; Polystyrene Foam; Uncoated Card Board; Uncoated Chipboard
Bond
1-Part
Good thermal shock resistance • Non-corrosive to copper for many electronic applications • Bonds polyolefins
Polypropylene; Galvanized Steel; Galvanized Steel; ABS; Aluminum; Ceramic; Enameled Steel; EVA; Glass; Polycarbonate; PolyEthylene; Rigid PVC; Silicone; Stainless steel
; Tedlar; Teflon
Excellent solvent resistance
Bond
1-Part
White, closed-cell acrylic foam carrier • Good adhesion to polypropylene and many powder paints• Apply as low as 50°F (10°C)
Polypropylene; ABS; Acrylic; Aluminum; Canvas; Glass filled polyester; Hi-impact styrene; Linear polyethylene; Many metals; Nylon; Phenolic Board; Phenolic Board; Plastic; PVC; Steel
Good water resistance
Bond
1-Part
Long tack range • Water and heat resistant bond for many plastics, including polyethylene minutes and polypropylene
Polypropylene; Aluminum; Bonding close-fitting components; Buna N Rubber; Epoxies; Grit blasted steel; Melamine; Metals; Most materials; Nylon; Phenolic; Plastics; Polyesters; Polyethylene; Polyurethane; PTFE; Rubber; Silicone; Steel; Urea formaldehyde
Air Reference; Dioctyl phthalate; Ethanol; Gasoline; Isopropanol; Solvent; Water resistance
Bond; Instant Adhesives
1-Part
A Single component, low viscosity general purpose cyanoacrylate adhesive, bonding product useful in applications or bonding closely fitting parts. It is fast setting and suitable for use on plastics, rubber and metals.
Polypropylene; Acetal; HDPE; Mild steel (grit blasted); Other low energy surfaces; Polyethylene; Polyolefin; Polytetrafluoroethylene (PTFE); Thermoplastic rubber materials; Thermoplastic rubber materials
95% RH; Chemical resistance; Solvent resistance; Water
Bond; Primer
1-Part
A one part component is a primer used to make polyolefin and other low energy surfaces. It has very low viscosity, transparent to slightly hazy color and recommended for difficult to bond substrates which include
polyethylene, polypropylene, thermoplastic rubber materials.
Polypropylene; Aluminum; EVA; PolyEthylene; Silicone; Stainless steel
; Tedlar; Teflon
Excellent solvent resistance
Bond
1-Part
White, closed-cell acrylic foam carrier • Good adhesion to polypropylene and many powder paints• Apply as low as 50°F (10°C)
Polypropylene; All metals; Butyl rubber; Epoxy; Halar; Kalrez; Melamine; Mild steel; Nylon 101; Polyethylene; Ryton; Silicone rubber; Teflon
Liquid cleaner; Remove
1-Part
Recommended for cleaning cured urethanes and crystallized isocyanates. can be used for extended periods, tolerate high resin loadings, and will reduce disposal costs. It is also recyclable via vacuum distillation. CU-6 is a non-gelling, higher flash point version of CU-5.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
