- Over 150 Material Manufacturers
- Updated & Quality Checked Data
Advanced Search
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent;
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.;
Manufacturer:
Parker Lord
Substrate:
Polyvinyl Chloride; Butyl; Cured Rubber; EPDM; Epoxy; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyurethane; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; TPU; various vulcanized, thermoset, and thermoplastic polymeric materials
Color:
Clear; Cloudy; Hazy
Primer E 500
Primer; 1-Part; Liquid; Silicone resin; Solvent;
Especially for silicone - for pre-treating non-absorbent surfaces such as aluminium, VA steel, brass, copper, zinc, tinplate and enamel, ceramic and glass as well as plastics such as ABS, PVC hard, PA6.6, GFC etc.
;
Manufacturer:
WEICON
Substrate:
PVC Hard; ABS; Aluminium; Brass; Ceramic; Copper; Enamel; GFC; Glass; Metal surfaces; Non-absorbent surfaces; PA6.6; Plastics; Tinplate; VA steel; Zinc
Color:
Slightly yellow; Transparent
Primer M 100
Primer; 1-Part; Liquid; Synthetic resin; Solvent;
For pre-treating non-absorbent metal surfaces (aluminium, steel, stainless steel, brass, copper, zinc, tinplate), plastics (ABS, rigid PVC, PA 6.6, FRP, SMC, PUR), lacquered surfaces, enamel, ceramics, and glass.;
Manufacturer:
WEICON
Substrate:
Rigid PVC; ABS; Aluminium; Brass; Ceramic; Copper; FRP; Glass; Lacquered surfaces; Metal surfaces; Non-absorbent surfaces; PA 6.6; Plastics; PUR; SMC; Stainless steel; Steel; Tinplate; Zinc
Color:
Colourless; Transparent
P-70 Primer For PVC Pipe & Fittings
Prime; 1-Part; Liquid; Solvent-based; Solvent;
A clear or purple coloured, non-bonded, very fast acting water thin solvent system. It is distinctly colored so that detection of its use in a joint can be made lated. The strong action of P-70 primer softens and dissolves the joining surfaces of PVC pipe and fittings very rapidly. ;
Manufacturer:
SCIGRIP (Weld-On)
Substrate:
PVC Pipe & Fiitings
Color:
Clear; Gray; Purple
Viscosity (cPs):
water thin
Simson Primer M
Primer; 1-Part; Liquid; Solvent-Based; None;
Fast drying “wash primer” for SMP based products.;
Manufacturer:
Bostik
Substrate:
PVC; ABS; Aluminium; Brass; Copper; Lacquered metals; Polyester; Powder coated metal; Steel
Color:
Transparent
Primer-215 Polyurethane
Primer; 1-Part; Liquid; Solvent-based; Atmospheric Moisture;
A transparent, pale yellow liquid of low viscosity that dries by reaction with atmospheric moisture. It is used to prime various plastics, timber and other porous materials prior to bonding with Sika®-products.;
Manufacturer:
Sika
Substrate:
PVC; ABS; Epoxy resins; FRP; GRP; Non-metallic substrates; Plastics; Plywood; Porous; Timber
Color:
Transparent with a slightly yellowish tint; Transparent with a slightly yellowish tint
Viscosity (cPs):
Low; 20
Primer K 200
Primer; 1-Part; Liquid; Synthetic resin; Solvent;
For pre-treating non-absorbent and lacquered surfaces, plastic materials (ABS, rigid PVC, PA 6.6, FRP, SMC, PUR), metals (aluminium, steel, stainless steel, brass, zinc, tinplate) and elastomers (EPDM).;
Manufacturer:
WEICON
Substrate:
Rigid PVC; ABS; Aluminium; Brass; Elastomers (EPDM); FRP; Lacquered surfaces; Metals; Non-absorbent surfaces; PA 6.6; Painted plastic surfaces; Plastic materials; PUR; SMC; Stainless steel; Steel; Tinplate; Zinc
Color:
Colourless
P-68
Prime; 1-Part; Liquid; Low VOC; Solvent;
A low VOC emission, non-bodied, fast acting, primer. The strong action of P-68 primer rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings. Available in clear and purple, the latter allows easy identification when used on the joining surfaces.;
Manufacturer:
SCIGRIP (Weld-On)
Substrate:
PVC; CPVC
Color:
Clear; Purple
Viscosity (cPs):
water thin
Sikaflex Primer-449
Primer; 1-Part; Liquid; Solvent-Based; Solvent;
Designed to promote adhesion to porous substrates such as porous PVC, solvent-based enamel, PPG’s fluorocarbon duranar-finish, and certain plastics such as ABS and plexiglass.;
Manufacturer:
Sika
Substrate:
Porous PVC; PVC; ABS; Acrylic Latex; Certain plastics; DeSoto Fluoropon; Emercoat 33; Fiberglass; Kynar; Lucite; Most substrates; Plexiglass; Plexiglass DR; Polyester; Porous substrates; PPG Duracon S600; PPG Polycron; PPG’s fluorocarbon Duranar-finish; Rovel Plastic; Solvent-based enamel; Solvent-based Enamel; Tuffak; Urethane; Urethane Rubber
Color:
Clear
1007M
Primer; 1-Part; Liquid; Toluene; Solvent;
A general purpose, solvent-synthetic resin based primer. It provides a firm base coat which maximizes the bonding efficiently of adhesive or coating subsequently applied.;
Manufacturer:
Bostik
Substrate:
PVC; Acrylic; Aluminum Including Plain; Anodized; Chromated; Concrete; Glass; Including chrome plated and stainless; Iron; Metal; Phenolic; Plastic; Polyester; Rubber; Steel; Wood
Color:
Brown; Yellow
Viscosity (cPs):
75 to 400
7701
Primer; 1-Part; Liquid; Solvent-Based; Solvent
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
Manufacturer: Parker Lord
Substrate: Polyvinyl Chloride; Butyl; Cured Rubber; EPDM; Epoxy; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyurethane; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; TPU; various vulcanized, thermoset, and thermoplastic polymeric materials
Color: Clear; Cloudy; Hazy
Primer E 500
Primer; 1-Part; Liquid; Silicone resin; Solvent
Especially for silicone - for pre-treating non-absorbent surfaces such as aluminium, VA steel, brass, copper, zinc, tinplate and enamel, ceramic and glass as well as plastics such as ABS, PVC hard, PA6.6, GFC etc.
Manufacturer: WEICON
Substrate: PVC Hard; ABS; Aluminium; Brass; Ceramic; Copper; Enamel; GFC; Glass; Metal surfaces; Non-absorbent surfaces; PA6.6; Plastics; Tinplate; VA steel; Zinc
Color: Slightly yellow; Transparent
Package Sizes
WEICON Primer E 500 250 ml
Primer M 100
Primer; 1-Part; Liquid; Synthetic resin; Solvent
For pre-treating non-absorbent metal surfaces (aluminium, steel, stainless steel, brass, copper, zinc, tinplate), plastics (ABS, rigid PVC, PA 6.6, FRP, SMC, PUR), lacquered surfaces, enamel, ceramics, and glass.
Manufacturer: WEICON
Substrate: Rigid PVC; ABS; Aluminium; Brass; Ceramic; Copper; FRP; Glass; Lacquered surfaces; Metal surfaces; Non-absorbent surfaces; PA 6.6; Plastics; PUR; SMC; Stainless steel; Steel; Tinplate; Zinc
Color: Colourless; Transparent
P-70 Primer For PVC Pipe & Fittings
Prime; 1-Part; Liquid; Solvent-based; Solvent
A clear or purple coloured, non-bonded, very fast acting water thin solvent system. It is distinctly colored so that detection of its use in a joint can be made lated. The strong action of P-70 primer softens and dissolves the joining surfaces of PVC pipe and fittings very rapidly.
Manufacturer: SCIGRIP (Weld-On)
Substrate: PVC Pipe & Fiitings
Color: Clear; Gray; Purple
Viscosity (cPs): water thin
Simson Primer M
Primer; 1-Part; Liquid; Solvent-Based; None
Fast drying “wash primer” for SMP based products.
Manufacturer: Bostik
Substrate: PVC; ABS; Aluminium; Brass; Copper; Lacquered metals; Polyester; Powder coated metal; Steel
Color: Transparent
Primer-215 Polyurethane
Primer; 1-Part; Liquid; Solvent-based; Atmospheric Moisture
A transparent, pale yellow liquid of low viscosity that dries by reaction with atmospheric moisture. It is used to prime various plastics, timber and other porous materials prior to bonding with Sika®-products.
Manufacturer: Sika
Substrate: PVC; ABS; Epoxy resins; FRP; GRP; Non-metallic substrates; Plastics; Plywood; Porous; Timber
Color: Transparent with a slightly yellowish tint; Transparent with a slightly yellowish tint
Viscosity (cPs): Low; 20
Package Sizes
250 ml Bottle
Primer K 200
Primer; 1-Part; Liquid; Synthetic resin; Solvent
For pre-treating non-absorbent and lacquered surfaces, plastic materials (ABS, rigid PVC, PA 6.6, FRP, SMC, PUR), metals (aluminium, steel, stainless steel, brass, zinc, tinplate) and elastomers (EPDM).
Manufacturer: WEICON
Substrate: Rigid PVC; ABS; Aluminium; Brass; Elastomers (EPDM); FRP; Lacquered surfaces; Metals; Non-absorbent surfaces; PA 6.6; Painted plastic surfaces; Plastic materials; PUR; SMC; Stainless steel; Steel; Tinplate; Zinc
Color: Colourless
P-68
Prime; 1-Part; Liquid; Low VOC; Solvent
A low VOC emission, non-bodied, fast acting, primer. The strong action of P-68 primer rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings. Available in clear and purple, the latter allows easy identification when used on the joining surfaces.
Manufacturer: SCIGRIP (Weld-On)
Substrate: PVC; CPVC
Color: Clear; Purple
Viscosity (cPs): water thin
Sikaflex Primer-449
Primer; 1-Part; Liquid; Solvent-Based; Solvent
Designed to promote adhesion to porous substrates such as porous PVC, solvent-based enamel, PPG’s fluorocarbon duranar-finish, and certain plastics such as ABS and plexiglass.
Manufacturer: Sika
Substrate: Porous PVC; PVC; ABS; Acrylic Latex; Certain plastics; DeSoto Fluoropon; Emercoat 33; Fiberglass; Kynar; Lucite; Most substrates; Plexiglass; Plexiglass DR; Polyester; Porous substrates; PPG Duracon S600; PPG Polycron; PPG’s fluorocarbon Duranar-finish; Rovel Plastic; Solvent-based enamel; Solvent-based Enamel; Tuffak; Urethane; Urethane Rubber
Color: Clear
Package Sizes
Pint
1007M
Primer; 1-Part; Liquid; Toluene; Solvent
A general purpose, solvent-synthetic resin based primer. It provides a firm base coat which maximizes the bonding efficiently of adhesive or coating subsequently applied.
Manufacturer: Bostik
Substrate: PVC; Acrylic; Aluminum Including Plain; Anodized; Chromated; Concrete; Glass; Including chrome plated and stainless; Iron; Metal; Phenolic; Plastic; Polyester; Rubber; Steel; Wood
Color: Brown; Yellow
Viscosity (cPs): 75 to 400
Package Sizes
Quart
Substrate
Application Type
Color
Viscosity
(cPs)
Description
Polyvinyl Chloride; Butyl; Cured Rubber; EPDM; Epoxy; Grit Blasted Steel; Natural rubber; Neoprene; Nitrile; Polybutadiene; Polychloroprene; Polymeric Elastomers; Polyurethane; SBR; Styrene Isoprene Rubbers; Synthetic Polyisoprene; Sytrene Butadiene Block Copolymers; Thermoplastic; TPU; various vulcanized, thermoset, and thermoplastic polymeric materials
Primer
Clear; Cloudy; Hazy
A solvent-based surface treatment used for various vulcanized, thermoset, and thermoplastic polymeric materials. Lord 7701 surface treatment is used in conjunction with a broad range of lord adhesives for bonding cured rubbers, including Lord epoxy and urethane adhesives.
PVC Hard; ABS; Aluminium; Brass; Ceramic; Copper; Enamel; GFC; Glass; Metal surfaces; Non-absorbent surfaces; PA6.6; Plastics; Tinplate; VA steel; Zinc
Primer
Slightly yellow; Transparent
Especially for silicone - for pre-treating non-absorbent surfaces such as aluminium, VA steel, brass, copper, zinc, tinplate and enamel, ceramic and glass as well as plastics such as ABS, PVC hard, PA6.6, GFC etc.
Rigid PVC; ABS; Aluminium; Brass; Ceramic; Copper; FRP; Glass; Lacquered surfaces; Metal surfaces; Non-absorbent surfaces; PA 6.6; Plastics; PUR; SMC; Stainless steel; Steel; Tinplate; Zinc
Primer
Colourless; Transparent
For pre-treating non-absorbent metal surfaces (aluminium, steel, stainless steel, brass, copper, zinc, tinplate), plastics (ABS, rigid PVC, PA 6.6, FRP, SMC, PUR), lacquered surfaces, enamel, ceramics, and glass.
PVC Pipe & Fiitings
Prime
Clear; Gray; Purple
water thin
A clear or purple coloured, non-bonded, very fast acting water thin solvent system. It is distinctly colored so that detection of its use in a joint can be made lated. The strong action of P-70 primer softens and dissolves the joining surfaces of PVC pipe and fittings very rapidly.
PVC; ABS; Aluminium; Brass; Copper; Lacquered metals; Polyester; Powder coated metal; Steel
Primer; Cleaner; Degreaser
Transparent
Fast drying “wash primer” for SMP based products.
PVC; ABS; Epoxy resins; FRP; GRP; Non-metallic substrates; Plastics; Plywood; Porous; Timber
Primer
Transparent with a slightly yellowish tint; Transparent with a slightly yellowish tint
Low; 20
A transparent, pale yellow liquid of low viscosity that dries by reaction with atmospheric moisture. It is used to prime various plastics, timber and other porous materials prior to bonding with Sika®-products.
Rigid PVC; ABS; Aluminium; Brass; Elastomers (EPDM); FRP; Lacquered surfaces; Metals; Non-absorbent surfaces; PA 6.6; Painted plastic surfaces; Plastic materials; PUR; SMC; Stainless steel; Steel; Tinplate; Zinc
Primer
Colourless
For pre-treating non-absorbent and lacquered surfaces, plastic materials (ABS, rigid PVC, PA 6.6, FRP, SMC, PUR), metals (aluminium, steel, stainless steel, brass, zinc, tinplate) and elastomers (EPDM).
PVC; CPVC
Prime
Clear; Purple
water thin
A low VOC emission, non-bodied, fast acting, primer. The strong action of P-68 primer rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings. Available in clear and purple, the latter allows easy identification when used on the joining surfaces.
Porous PVC; PVC; ABS; Acrylic Latex; Certain plastics; DeSoto Fluoropon; Emercoat 33; Fiberglass; Kynar; Lucite; Most substrates; Plexiglass; Plexiglass DR; Polyester; Porous substrates; PPG Duracon S600; PPG Polycron; PPG’s fluorocarbon Duranar-finish; Rovel Plastic; Solvent-based enamel; Solvent-based Enamel; Tuffak; Urethane; Urethane Rubber
Primer; Promote adhesion
Clear
Designed to promote adhesion to porous substrates such as porous PVC, solvent-based enamel, PPG’s fluorocarbon duranar-finish, and certain plastics such as ABS and plexiglass.
PVC; Acrylic; Aluminum Including Plain; Anodized; Chromated; Concrete; Glass; Including chrome plated and stainless; Iron; Metal; Phenolic; Plastic; Polyester; Rubber; Steel; Wood
Primer
Brown; Yellow
75 to 400
A general purpose, solvent-synthetic resin based primer. It provides a firm base coat which maximizes the bonding efficiently of adhesive or coating subsequently applied.
x
DID YOU FIND THE DATA YOU WERE LOOKING FOR?
Close X
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
